Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda CX-90 built from 2024 to 2026 (Select, Preferred, Preferred Plus, Premium, Premium Plus, Turbo S, Turbo S Premium, Turbo S Premium Plus, PHEV Premium, PHEV Premium Plus).
Every 2024-2026 Mazda CX-90 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda CX-90 (1st Gen (KK)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Select | 2024-2026 | See factory sizes below |
| Preferred | 2024-2026 | See factory sizes below |
| Preferred Plus | 2024-2026 | See factory sizes below |
| Premium | 2024-2026 | See factory sizes below |
| Premium Plus | 2024-2026 | See factory sizes below |
| Turbo S | 2024-2026 | See factory sizes below |
| Turbo S Premium | 2024-2026 | See factory sizes below |
| Turbo S Premium Plus | 2024-2026 | See factory sizes below |
| PHEV Premium | 2024-2026 | 21x9.5 +45 |
| PHEV Premium Plus | 2024-2026 | 21x9.5 +45 |
Wheel sizes Mazda fitted to the 2024-2026 Mazda CX-90 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +45 |
| 19x8.5 +45 |
| 20x9 +45 |
| 21x9.5 +45 |
Widths and offsets with Verified Fitment on the 2024-2026 Mazda CX-90: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-23" | 8" | +9 to +55 |
| 18-23" | 8.5" | +15 to +61 |
| 18-23" | 9" | +21 to +57 |
| 18-23" | 9.5" | +28 to +50 |
| 18-23" | 10" | +34 to +44 |
Wider still: 18x11 +26 to +37; 19x11 +26 to +37; 20x11 +26 to +37; 21x11 +26 to +37; 22x11 +26 to +37; 23x11 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
| Diameter | Width | Offset range |
|---|---|---|
| 21-23" | 9.5" | +28 to +50 |
| 21-23" | 10" | +34 to +44 |
Wider still: 21x11 +26 to +37; 22x11 +26 to +37; 23x11 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2026 Mazda CX-90. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)
The 2024-2026 Mazda CX-90 (1st Gen (KK)) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 18x8 +45; 19x8.5 +45; 20x9 +45; 21x9.5 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 18" to 23" in diameter; see the size table for the offset range at each width.