Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mazda MPV built from 1989 to 1998 (2WD, 4WD).
Every 1989-1998 Mazda MPV uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda MPV (LV) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| 2WD | 1989-1998 |
| 4WD | 1989-1998 |
Wheel sizes Mazda fitted to the 1989-1998 Mazda MPV from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x5.5 +40 |
| 15x6 +40 |
| 15x6.5 +42 |
| 16x6.5 +42 |
| 16x7 +38 |
Widths and offsets with Verified Fitment on the 1989-1998 Mazda MPV: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | +23 to +46 |
| 15-17" | 6.5" | +29 to +39 |
Wider still: 15x7.5 +21 to +32; 16x7.5 +21 to +32; 17x7.5 +21 to +32 fit with modifications (roll fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
The 1989-1998 Mazda MPV (LV) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 15x5.5 +40; 15x6 +40; 15x6.5 +42; 16x6.5 +42; 16x7 +38.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.