Mazda MX-30 (DR) 2022-2023 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mazda MX-30 built from 2022 to 2023 (Base, Premium Plus).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2022-2023
GenerationDR

Every 2022-2023 Mazda MX-30 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mazda MX-30 (DR) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
Base2022-2023
Premium Plus2022-2023

Factory wheel sizes

Wheel sizes Mazda fitted to the 2022-2023 Mazda MX-30 from the factory. Offsets are ET in millimeters.

Factory size
18x7 +45
18x7.5 +45
19x7 +45
19x7.5 +45
19x8 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2022-2023 Mazda MX-30: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-20"7"+28 to +50
18-20"7.5"+34 to +44

Wider still: 18x8.5 +26 to +37; 19x8.5 +26 to +37; 20x8.5 +26 to +37 fit with modifications (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2023 Mazda MX-30. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires)

FAQ

What is the bolt pattern of the 2022-2023 Mazda MX-30?

The 2022-2023 Mazda MX-30 (DR) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2022-2023 Mazda MX-30 from the factory?

Factory sizes: 18x7 +45; 18x7.5 +45; 19x7 +45; 19x7.5 +45; 19x8 +45.

What lug thread size does the 2022-2023 Mazda MX-30 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2022-2023 Mazda MX-30 without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.