Mazda Protegé (BJ) 1999-2001 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mazda Protegé built from 1999 to 2001 (DX, LX, ES).

Fitment specs

Bolt pattern4X100
Center bore54.1 mm
Model years1999-2001
GenerationBJ

Every 1999-2001 Mazda Protegé uses a 4X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mazda Protegé (BJ) and the model years each was sold. All of them share the 4X100 bolt pattern.

SubmodelYears
DX1999-2001
LX1999-2001
ES1999-2001

Factory wheel sizes

Wheel sizes Mazda fitted to the 1999-2001 Mazda Protegé from the factory. Offsets are ET in millimeters.

Factory size
14x5.5 +45
15x6 +45
16x6 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1999-2001 Mazda Protegé: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
14-17"5.5"+28 to +50
14-17"6"+34 to +44

Wider still: 14x7 +26 to +37; 15x7 +26 to +37; 16x7 +26 to +37; 17x7 +26 to +37 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).

FAQ

What is the bolt pattern of the 1999-2001 Mazda Protegé?

The 1999-2001 Mazda Protegé (BJ) uses a 4X100 bolt pattern and a 54.1 mm center bore.

What size wheels came on the 1999-2001 Mazda Protegé from the factory?

Factory sizes: 14x5.5 +45; 15x6 +45; 16x6 +45.

What aftermarket wheel sizes fit the 1999-2001 Mazda Protegé without modifications?

Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.