Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz 190 Series built from 1984 to 1993 (190D 2.2, 190D 2.5, 190E 2.3, 190E 2.6, 190E 2.3-16).
Every 1984-1993 Mercedes-Benz 190 Series uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz 190 Series (W201) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 190D 2.2 | 1984-1985 | 14x5 +50 15x6 +49 |
| 190D 2.5 | 1986-1989 | 15x6 +49 16x6.5 +45 |
| 190E 2.3 | 1984-1988 | 15x6 +49 16x6.5 +45 |
| 190E 2.6 | 1987-1993 | See factory sizes below |
| 190E 2.3-16 | 1986-1987 | 15x7 +44 16x8 +35 |
Wheel sizes Mercedes-Benz fitted to the 1984-1993 Mercedes-Benz 190 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 14x5 +50 |
| 15x6 +49 |
| 15x7 +44 |
| 16x6.5 +45 |
| 16x7 +45 |
| 16x8 +34 |
| 17x8.25 +34 |
Widths and offsets with Verified Fitment on the 1984-1993 Mercedes-Benz 190 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 14-16" | 5" | +19 to +60 |
| 14-16" | 5.5" | +26 to +61 |
| 14-16" | 6" | +32 to +54 |
| 14-16" | 6.5" | +38 to +48 |
Wider still: 14x7.5 +30 to +41; 15x7.5 +30 to +41; 16x7.5 +30 to +41 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 15-16" | 6" | +32 to +54 |
| 15-16" | 6.5" | +38 to +48 |
Wider still: 15x7.5 +30 to +41; 16x7.5 +30 to +41 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 14-16" | 5" | +19 to +60 |
| 14-16" | 5.5" | +26 to +61 |
| 14-16" | 6" | +32 to +54 |
| 14-16" | 6.5" | +38 to +48 |
Wider still: 14x7.5 +30 to +41; 15x7.5 +30 to +41; 16x7.5 +30 to +41 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 15-16" | 7" | +44 |
Wider still: 15x7.5 +30 to +41; 16x7.5 +30 to +41 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
The 1984-1993 Mercedes-Benz 190 Series (W201) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 14x5 +50; 15x6 +49; 15x7 +44; 16x6.5 +45; 16x7 +45; 16x8 +34; 17x8.25 +34.
Bolt-on sizes run from 14" to 16" in diameter; see the size table for the offset range at each width.