Mercedes-Benz AMG GT (C192) 2024-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mercedes-Benz AMG GT built from 2024 to 2026 (AMG GT43, AMG GT55, AMG GT63, AMG GT63 Pro, AMG GT63 S E Performance).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years2024-2026
GenerationC192

Every 2024-2026 Mercedes-Benz AMG GT uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz AMG GT (C192) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYears
AMG GT432025-2026
AMG GT552024-2026
AMG GT632024-2026
AMG GT63 Pro2025-2026
AMG GT63 S E Performance2025-2026

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 2024-2026 Mercedes-Benz AMG GT from the factory. Offsets are ET in millimeters.

Factory size
19x9.5 +50 front / 19x11 +53 rear
20x9.5 +53 front / 20x11 +56 rear
20x10.5 +42 front / 20x11 +33 rear
21x9.5 +56 front / 21x11 +60 rear
21x10.5 +42 front / 21x11 +33 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2026 Mercedes-Benz AMG GT: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
19-22"9.5"+12 to +60—
19-22"10"+18 to +55—
19-22"10.5"+25 to +49—
19-22"11"+31 to +42+16 to +63
19-22"11.5"—+22 to +59
19-22"12"—+29 to +53

Wider still: 19x12.5 front — / rear +14 to +52; 19x13 front — / rear +21 to +46; 20x12.5 front — / rear +14 to +52; 20x13 front — / rear +21 to +46; 21x12.5 front — / rear +14 to +52; 21x13 front — / rear +21 to +46… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2026 Mercedes-Benz AMG GT. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 2024-2026 Mercedes-Benz AMG GT?

The 2024-2026 Mercedes-Benz AMG GT (C192) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2024-2026 Mercedes-Benz AMG GT from the factory?

Factory sizes: 19x9.5 +50 front / 19x11 +53 rear; 20x9.5 +53 front / 20x11 +56 rear; 20x10.5 +42 front / 20x11 +33 rear; 21x9.5 +56 front / 21x11 +60 rear; 21x10.5 +42 front / 21x11 +33 rear.

What lug thread size does the 2024-2026 Mercedes-Benz AMG GT use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2024-2026 Mercedes-Benz AMG GT without modifications?

Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.