Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz C-Class built from 2001 to 2007 (C230, C240, C240 4MATIC, C280, C280 4MATIC, C320, C320 4MATIC, C350, C32 AMG, C55 AMG).
Every 2001-2007 Mercedes-Benz C-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz C-Class (W203) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| C230 | 2002-2007 | 16x7 +31 16x7 +37 16x8 +32 17x7.5 +36 17x8.5 +34 18x7.5 +36 18x8.5 +34 |
| C240 | 2001-2005 | 16x7 +31 16x7 +37 16x8 +32 17x7.5 +36 17x8.5 +34 18x7.5 +36 18x8.5 +34 |
| C240 4MATIC | 2003-2005 | See factory sizes below |
| C280 | 2006-2007 | 16x7 +31 16x7 +37 16x8 +32 17x7.5 +36 17x8.5 +34 18x7.5 +36 18x8.5 +34 |
| C280 4MATIC | 2006-2007 | See factory sizes below |
| C320 | 2001-2005 | 16x7 +31 16x7 +37 16x8 +32 17x7.5 +36 17x8.5 +34 18x7.5 +36 18x8.5 +34 |
| C320 4MATIC | 2003-2005 | See factory sizes below |
| C350 | 2006-2007 | 17x7.5 +36 17x8.5 +34 18x7.5 +36 18x8.5 +34 18x9 +30 |
| C32 AMG | 2002-2004 | See factory sizes below |
| C55 AMG | 2005-2006 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2001-2007 Mercedes-Benz C-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +31 |
| 15x6.5 +37 |
| 16x7 +31 |
| 16x7 +37 |
| 16x7 +37 front / 16x8 +32 rear |
| 16x8 +32 |
| 17x7.5 +36 |
| 17x7.5 +37 front / 17x8.5 +34 rear |
| 17x8.5 +34 |
| 18x7.5 +36 |
| 18x8.5 +34 |
| 18x9 +30 |
Widths and offsets with Verified Fitment on the 2001-2007 Mercedes-Benz C-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-19" | 7" | +12 to +41 | +12 to +41 |
| 16-19" | 7.5" | +19 to +44 | +18 to +47 |
| 16-19" | 8" | +25 to +38 | +24 to +54 |
| 16-19" | 8.5" | +32 | +31 to +47 |
| 16-19" | 9" | — | +37 to +41 |
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 15-19" | 6" | +0 to +41 | -1 to +41 |
| 15-19" | 6.5" | +6 to +47 | +5 to +47 |
| 15-19" | 7" | +12 to +51 | +12 to +54 |
| 15-19" | 7.5" | +19 to +44 | +18 to +60 |
| 15-19" | 8" | +25 to +38 | +24 to +54 |
| 15-19" | 8.5" | +32 | +31 to +47 |
| 15-19" | 9" | — | +37 to +41 |
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 7.5" | +19 to +44 | +18 to +46 |
| 17-19" | 8" | +25 to +38 | +24 to +52 |
| 17-19" | 8.5" | +32 | +31 to +47 |
| 17-19" | 9" | — | +37 to +41 |
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2001-2007 Mercedes-Benz C-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.








Modifications Required (roll rear fender lips, adjustable rear camber arms, hub-centric rings (66.6 mm), correct-length ball-seat (r12) lug bolts)




















Modifications Required (roll rear fender lips, adjustable rear camber arms, hub-centric rings (66.6 mm), correct-length ball-seat (r12) lug bolts)




















Modifications Required (roll rear fender lips, adjustable rear camber arms, hub-centric rings (66.6 mm), correct-length ball-seat (r12) lug bolts)












The 2001-2007 Mercedes-Benz C-Class (W203) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 15x6 +31; 15x6.5 +37; 16x7 +31; 16x7 +37; 16x7 +37 front / 16x8 +32 rear; 16x8 +32; 17x7.5 +36; 17x7.5 +37 front / 17x8.5 +34 rear; 17x8.5 +34; 18x7.5 +36; 18x8.5 +34; 18x9 +30.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.