Mercedes-Benz CLK (C208/A208) 1998-2003 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz CLK built from 1998 to 2003 (CLK320, CLK430, CLK500, CLK55 AMG).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Model years1998-2003
GenerationC208/A208

Every 1998-2003 Mercedes-Benz CLK uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz CLK (C208/A208) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
CLK3201998-200316x7 +37
16x8 +36
17x7.5 +36
17x7.5 +37
17x8.5 +30
18x7.5 +36
18x7.5 +37
18x9 +30
CLK4301999-200316x7 +37
16x8 +36
17x7.5 +36
17x7.5 +37
17x8.5 +30
18x9 +30
CLK500200317x7.5 +36
17x7.5 +37
17x7.5 +36 front / 17x8.5 +30 rear
17x7.5 +37 front / 17x8.5 +30 rear
17x7.5 +37 front / 17x8.5 +34 rear
17x8.5 +30
18x7.5 +36
18x7.5 +37
18x7.5 +36 front / 18x8.5 +30 rear
18x7.5 +37 front / 18x8.5 +30 rear
19x8 +30 front / 19x9 +25 rear
CLK55 AMG2001-200317x7.5 +37
17x7.5 +37 front / 17x8.5 +30 rear
17x7.5 +37 front / 17x8.5 +34 rear
18x7.5 +37
18x7.5 +37 front / 18x8 +34 rear
18x7.5 +37 front / 18x8.5 +30 rear
18x8 +34
18x8 +34 front / 18x8.5 +30 rear
18x8.5 +30 front / 18x9.5 +18 rear
19x8 +30 front / 19x8.5 +30 rear
19x8 +30 front / 19x9 +25 rear

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 1998-2003 Mercedes-Benz CLK from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6.5 +37
15x7 +37
16x6.5 +37
16x7 +37
16x7 +37 front / 16x8 +36 rear
16x8 +36
17x7.5 +36
17x7.5 +37 front / 17x8.5 +30 rear
17x8.5 +30
18x9 +30

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1998-2003 Mercedes-Benz CLK: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

CLK320, CLK430

DiameterWidthFront offsetRear offset
16-18"7"+20 to +42+6 to +47
16-18"7.5"+26 to +36+13 to +48
16-18"8"—+19 to +41
16-18"8.5"—+25 to +35

Wider still: 16x9.5 front — / rear +17 to +28; 17x9.5 front — / rear +17 to +28; 18x9.5 front — / rear +17 to +28 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

CLK500

DiameterWidthFront offsetRear offset
17-19"7.5"+26 to +36+13 to +46
17-19"8"—+19 to +41
17-19"8.5"—+25 to +35

Wider still: 17x9.5 front — / rear +17 to +28; 18x9.5 front — / rear +17 to +28; 19x9.5 front — / rear +17 to +28 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

CLK55 AMG

DiameterWidthFront offsetRear offset
17-19"7.5"+26 to +37+13 to +47
17-19"8"—+19 to +41
17-19"8.5"—+25 to +35

Wider still: 17x9.5 front — / rear +17 to +28; 18x9.5 front — / rear +17 to +28; 19x9.5 front — / rear +17 to +28 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1998-2003 Mercedes-Benz CLK. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

CLK320, CLK430

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

CLK500

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

CLK55 AMG

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 1998-2003 Mercedes-Benz CLK?

The 1998-2003 Mercedes-Benz CLK (C208/A208) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 1998-2003 Mercedes-Benz CLK from the factory?

Factory sizes: 15x6.5 +37; 15x7 +37; 16x6.5 +37; 16x7 +37; 16x7 +37 front / 16x8 +36 rear; 16x8 +36; 17x7.5 +36; 17x7.5 +37 front / 17x8.5 +30 rear; 17x8.5 +30; 18x9 +30.

What aftermarket wheel sizes fit the 1998-2003 Mercedes-Benz CLK without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.