Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz CLS built from 2012 to 2018 (CLS400, CLS400 4MATIC, CLS550, CLS550 4MATIC, CLS63 AMG, CLS63 AMG S).
Every 2012-2018 Mercedes-Benz CLS uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz CLS (C218) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| CLS400 | 2015-2017 | 17x8.5 +34.5 18x8.5 +34.5 18x8.5 +34.5 front / 18x9.5 +48 rear 19x8.5 +34.5 19x8.5 +34.5 front / 19x9.5 +48 rear 19x8.5 +35.5 front / 19x9.5 +48 rear |
| CLS400 4MATIC | 2015-2017 | See factory sizes below |
| CLS550 | 2012-2018 | 18x8.5 +34.5 front / 18x9.5 +48 rear 19x8.5 +34.5 19x8.5 +34.5 front / 19x9.5 +48 rear 19x8.5 +35.5 front / 19x9.5 +48 rear 20x9 +35 front / 20x10 +45 rear |
| CLS550 4MATIC | 2013-2018 | See factory sizes below |
| CLS63 AMG | 2012-2013 | See factory sizes below |
| CLS63 AMG S | 2014-2018 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2012-2018 Mercedes-Benz CLS from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8.5 +34.5 |
| 18x8 +33 |
| 18x8 +33 front / 18x9 +33 rear |
| 18x8.5 +34.5 |
| 18x8.5 +34.5 front / 18x9.5 +48 rear |
| 18x9 +33 |
| 19x8 +33 |
| 19x8 +33 front / 19x9 +33 rear |
| 19x8 +33 front / 19x9 +28 rear |
| 19x8.5 +34.5 |
| 19x8.5 +34.5 front / 19x9.5 +48 rear |
| 19x9 +28 |
| 19x9 +33 |
| 20x8 +33 front / 20x9 +28 rear |
| 20x8 +33 front / 20x9 +33 rear |
| 20x9 +28 |
| 20x9 +33 |
| 20x9 +35 front / 20x10 +45 rear |
Widths and offsets with Verified Fitment on the 2012-2018 Mercedes-Benz CLS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-21" | 8.5" | +17 to +40 | +4 to +44 |
| 17-21" | 9" | +24 to +34 | +10 to +51 |
| 17-21" | 9.5" | — | +16 to +53 |
| 17-21" | 10" | — | +23 to +47 |
| 17-21" | 10.5" | — | +29 to +41 |
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-21" | 8.5" | +17 to +40 | — |
| 17-21" | 9" | +24 to +34 | — |
| 17-21" | 9.5" | — | +16 to +53 |
| 17-21" | 10" | — | +23 to +47 |
| 17-21" | 10.5" | — | +29 to +41 |
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8.5" | +17 to +40 | — |
| 18-21" | 9" | +24 to +34 | — |
| 18-21" | 9.5" | — | +16 to +53 |
| 18-21" | 10" | — | +23 to +47 |
| 18-21" | 10.5" | — | +29 to +41 |
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2012-2018 Mercedes-Benz CLS. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)
















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)
















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)




The 2012-2018 Mercedes-Benz CLS (C218) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x8.5 +34.5; 18x8 +33; 18x8 +33 front / 18x9 +33 rear; 18x8.5 +34.5; 18x8.5 +34.5 front / 18x9.5 +48 rear; 18x9 +33; 19x8 +33; 19x8 +33 front / 19x9 +33 rear; 19x8 +33 front / 19x9 +28 rear; 19x8.5 +34.5; 19x8.5 +34.5 front / 19x9.5 +48 rear; 19x9 +28; 19x9 +33; 20x8 +33 front / 20x9 +28 rear; 20x8 +33 front / 20x9 +33 rear; 20x9 +28; 20x9 +33; 20x9 +35 front / 20x10 +45 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.