Mercedes-Benz E-Class Cabriolet (A207) 2011-2017 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mercedes-Benz E-Class Cabriolet built from 2011 to 2017 (E350, E400, E550).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Model years2011-2017
GenerationA207

Every 2011-2017 Mercedes-Benz E-Class Cabriolet uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz E-Class Cabriolet (A207) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYears
E3502011-2015
E4002016-2017
E5502011-2017

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 2011-2017 Mercedes-Benz E-Class Cabriolet from the factory. Offsets are ET in millimeters.

Factory size
17x7.5 +45
17x7.5 +45 front / 17x8.5 +49 rear
17x7.5 +45 front / 17x8.5 +40 rear
18x8 +45
18x8 +45 front / 18x8.5 +49 rear
18x8 +48 front / 18x8.5 +49 rear
19x8 +44 front / 19x8.5 +48 rear
19x8 +45 front / 19x9 +54 rear
19x8.5 +44

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2011-2017 Mercedes-Benz E-Class Cabriolet: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
17-20"7.5"+28 to +50—
17-20"8"+34 to +44—
17-20"8.5"—+32 to +54
17-20"9"—+38 to +48

Wider still: 17x10 front — / rear +30 to +41; 18x10 front — / rear +30 to +41; 19x10 front — / rear +30 to +41; 20x10 front — / rear +30 to +41 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2011-2017 Mercedes-Benz E-Class Cabriolet. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 2011-2017 Mercedes-Benz E-Class Cabriolet?

The 2011-2017 Mercedes-Benz E-Class Cabriolet (A207) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2011-2017 Mercedes-Benz E-Class Cabriolet from the factory?

Factory sizes: 17x7.5 +45; 17x7.5 +45 front / 17x8.5 +49 rear; 17x7.5 +45 front / 17x8.5 +40 rear; 18x8 +45; 18x8 +45 front / 18x8.5 +49 rear; 18x8 +48 front / 18x8.5 +49 rear; 19x8 +44 front / 19x8.5 +48 rear; 19x8 +45 front / 19x9 +54 rear; 19x8.5 +44.

What aftermarket wheel sizes fit the 2011-2017 Mercedes-Benz E-Class Cabriolet without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.