Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz EQB built from 2022 to 2025 (EQB250+, EQB300 4MATIC, EQB350 4MATIC).
Every 2022-2025 Mercedes-Benz EQB uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz EQB (X243) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| EQB250+ | 2023-2025 | 18x7.5 +53 |
| EQB300 4MATIC | 2022-2025 | 18x6.5 +44.5 18x7.5 +53.5 19x7.5 +53.5 20x8.5 +50.5 |
| EQB350 4MATIC | 2022-2025 | 18x6.5 +44.5 18x7.5 +53.5 19x7.5 +53.5 20x8.5 +50.5 |
Wheel sizes Mercedes-Benz fitted to the 2022-2025 Mercedes-Benz EQB from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x6.5 +44 |
| 18x7.5 +53 |
| 19x7.5 +53 |
| 20x8.5 +50 |
Widths and offsets with Verified Fitment on the 2022-2025 Mercedes-Benz EQB: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-22" | 7.5" | +36 to +58 |
| 18-22" | 8" | +42 to +52 |
Wider still: 18x9 +34 to +45; 19x9 +34 to +45; 20x9 +34 to +45; 21x9 +34 to +45; 22x9 +34 to +45 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
| Diameter | Width | Offset range |
|---|---|---|
| 18-22" | 6.5" | +23 to +54 |
| 18-22" | 7" | +29 to +61 |
| 18-22" | 7.5" | +36 to +58 |
| 18-22" | 8" | +42 to +52 |
Wider still: 18x9 +34 to +45; 19x9 +34 to +45; 20x9 +34 to +45; 21x9 +34 to +45; 22x9 +34 to +45 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2025 Mercedes-Benz EQB. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2022-2025 Mercedes-Benz EQB (X243) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x6.5 +44; 18x7.5 +53; 19x7.5 +53; 20x8.5 +50.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.