Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mercedes-Benz EQE Sedan built from 2023 to 2026 (EQE350+, EQE350 4MATIC, EQE500 4MATIC, AMG EQE).
Every 2023-2026 Mercedes-Benz EQE Sedan uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz EQE Sedan (V295) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| EQE350+ | 2023-2026 |
| EQE350 4MATIC | 2023-2026 |
| EQE500 4MATIC | 2023-2026 |
| AMG EQE | 2023-2026 |
Wheel sizes Mercedes-Benz fitted to the 2023-2026 Mercedes-Benz EQE Sedan from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8 +45 |
| 19x8.5 +47 |
| 20x9 +50 |
| 20x9 +50 front / 20x10 +66 rear |
| 21x9 +50 front / 21x10 +66 rear |
Widths and offsets with Verified Fitment on the 2023-2026 Mercedes-Benz EQE Sedan: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-22" | 8.5" | +30 to +52 |
| 19-22" | 9" | +36 to +46 |
Wider still: 19x10 +28 to +39; 20x10 +28 to +39; 21x10 +28 to +39; 22x10 +28 to +39 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 Mercedes-Benz EQE Sedan. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.










Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)












The 2023-2026 Mercedes-Benz EQE Sedan (V295) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 19x8 +45; 19x8.5 +47; 20x9 +50; 20x9 +50 front / 20x10 +66 rear; 21x9 +50 front / 21x10 +66 rear.
Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.