Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz G-Class built from 2002 to 2018 (G500, G550, G55 AMG, G63 AMG, G65 AMG).
Every 2002-2018 Mercedes-Benz G-Class uses a 5X130 bolt pattern with a 84.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 84.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz G-Class (W463) and the model years each was sold. All of them share the 5X130 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| G500 | 2002-2008 | 16x7.5 +63 18x7.5 +43 18x7.5 +63 18x8.5 +48 18x9.5 +50 19x9.5 +50 20x9.5 +50 |
| G550 | 2009-2018 | 18x7.5 +43 18x7.5 +63 18x9.5 +50 19x9.5 +50 20x9.5 +50 |
| G55 AMG | 2003-2011 | See factory sizes below |
| G63 AMG | 2013-2018 | See factory sizes below |
| G65 AMG | 2013-2018 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2002-2018 Mercedes-Benz G-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7.5 +43 |
| 16x7.5 +63 |
| 17x7.5 +63 |
| 18x7.5 +43 |
| 18x7.5 +63 |
| 18x8.5 +48 |
| 18x9.5 +50 |
| 19x9.5 +50 |
| 20x9.5 +50 |
Widths and offsets with Verified Fitment on the 2002-2018 Mercedes-Benz G-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 7.5" | +46 to +68 |
| 16-20" | 8" | +52 to +62 |
Wider still: 16x9 +44 to +55; 17x9 +44 to +55; 18x9 +44 to +55; 19x9 +44 to +55; 20x9 +44 to +55 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 7.5" | +43 to +53 |
| 18-20" | 8" | +50 to +59 |
| 18-20" | 8.5" | +56 |
Wider still: 18x9 +44 to +55; 19x9 +44 to +55; 20x9 +44 to +55 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 16-19" | 7.5" | +46 to +68 |
| 16-19" | 8" | +52 to +62 |
Wider still: 16x9 +44 to +55; 17x9 +44 to +55; 18x9 +44 to +55; 19x9 +44 to +55 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
The 2002-2018 Mercedes-Benz G-Class (W463) uses a 5X130 bolt pattern and a 84.1 mm center bore.
Factory sizes: 16x7.5 +43; 16x7.5 +63; 17x7.5 +63; 18x7.5 +43; 18x7.5 +63; 18x8.5 +48; 18x9.5 +50; 19x9.5 +50; 20x9.5 +50.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.