Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLB-Class built from 2020 to 2026 (GLB250, GLB250 4MATIC, AMG GLB35).
Every 2020-2026 Mercedes-Benz GLB-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLB-Class (X247) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GLB250 | 2020-2026 | 17x6.5 +44 17x7 +44 18x6.5 +44 18x7.5 +53 19x7.5 +53 20x8 +48 |
| GLB250 4MATIC | 2020-2026 | See factory sizes below |
| AMG GLB35 | 2021-2026 | 19x8 +49 20x8.5 +51 21x8.5 +51 |
Wheel sizes Mercedes-Benz fitted to the 2020-2026 Mercedes-Benz GLB-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x6.5 +44 |
| 17x7 +44 |
| 18x6.5 +44 |
| 18x7.5 +53 |
| 19x7.5 +53 |
| 20x8 +48 |
Widths and offsets with Verified Fitment on the 2020-2026 Mercedes-Benz GLB-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-22" | 6.5" | +12 to +54 |
| 17-22" | 7" | +18 to +60 |
| 17-22" | 7.5" | +25 to +60 |
| 17-22" | 8" | +31 to +53 |
| 17-22" | 8.5" | +37 to +47 |
Wider still: 17x9.5 +29 to +40; 18x9.5 +29 to +40; 19x9.5 +29 to +40; 20x9.5 +29 to +40; 21x9.5 +29 to +40; 22x9.5 +29 to +40 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
| Diameter | Width | Offset range |
|---|---|---|
| 19-22" | 8" | +31 to +53 |
| 19-22" | 8.5" | +37 to +47 |
Wider still: 19x9.5 +29 to +40; 20x9.5 +29 to +40; 21x9.5 +29 to +40; 22x9.5 +29 to +40 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2026 Mercedes-Benz GLB-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.








Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)














Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2020-2026 Mercedes-Benz GLB-Class (X247) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x6.5 +44; 17x7 +44; 18x6.5 +44; 18x7.5 +53; 19x7.5 +53; 20x8 +48.
Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.