Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLC Coupe built from 2017 to 2023 (GLC300 4MATIC Coupe, AMG GLC43 Coupe, AMG GLC63 S Coupe).
Every 2017-2023 Mercedes-Benz GLC Coupe uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLC Coupe (C253) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| GLC300 4MATIC Coupe | 2017-2023 |
| AMG GLC43 Coupe | 2017-2023 |
| AMG GLC63 S Coupe | 2018-2023 |
Wheel sizes Mercedes-Benz fitted to the 2017-2023 Mercedes-Benz GLC Coupe from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +38 |
| 19x8 +38 |
| 19x9 +20 |
| 20x8.5 +40 |
| 20x9.5 +22 |
Widths and offsets with Verified Fitment on the 2017-2023 Mercedes-Benz GLC Coupe: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-22" | 8" | +21 to +43 |
| 18-22" | 8.5" | +27 to +37 |
Wider still: 18x9.5 +19 to +30; 19x9.5 +19 to +30; 20x9.5 +19 to +30; 21x9.5 +19 to +30; 22x9.5 +19 to +30 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2023 Mercedes-Benz GLC Coupe. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)





The 2017-2023 Mercedes-Benz GLC Coupe (C253) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x8 +38; 19x8 +38; 19x9 +20; 20x8.5 +40; 20x9.5 +22.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.