Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz GLK built from 2010 to 2015 (GLK250 BlueTEC 4MATIC, GLK350, GLK350 4MATIC).
Every 2010-2015 Mercedes-Benz GLK uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz GLK (X204) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GLK250 BlueTEC 4MATIC | 2013-2015 | See factory sizes below |
| GLK350 | 2010-2015 | 17x7.5 +47.5 17x8 +57 18x7.5 +47 18x8 +57 19x7.5 +47 19x8.5 +52 20x9 +54 20x9.5 +57 |
| GLK350 4MATIC | 2010-2015 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2010-2015 Mercedes-Benz GLK from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +47.5 |
| 17x7.5 +47.5 front / 17x8 +57 rear |
| 17x8 +57 |
| 18x7.5 +47 |
| 18x7.5 +47 front / 18x8 +57 rear |
| 18x8 +57 |
| 19x7.5 +47 |
| 19x7.5 +47 front / 19x8.5 +52 rear |
| 19x8.5 +52 |
| 20x8 +42 front / 20x9 +54 rear |
| 20x8.5 +45 front / 20x9.5 +57 rear |
| 20x9 +54 |
| 20x9.5 +57 |
Widths and offsets with Verified Fitment on the 2010-2015 Mercedes-Benz GLK: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-22" | 7.5" | +30 to +53 | — |
| 17-22" | 8" | +37 to +47 | +40 to +62 |
| 17-22" | 8.5" | — | +46 to +56 |
Wider still: 17x9.5 front — / rear +38 to +49; 18x9.5 front — / rear +38 to +49; 19x9.5 front — / rear +38 to +49; 20x9.5 front — / rear +38 to +49; 21x9.5 front — / rear +38 to +49; 22x9.5 front — / rear +38 to +49 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-22" | 7.5" | +30 to +53 | +34 to +57 |
| 17-22" | 8" | +37 to +47 | +40 to +62 |
| 17-22" | 8.5" | — | +46 to +56 |
Wider still: 17x9.5 front — / rear +38 to +49; 18x9.5 front — / rear +38 to +49; 19x9.5 front — / rear +38 to +49; 20x9.5 front — / rear +38 to +49; 21x9.5 front — / rear +38 to +49; 22x9.5 front — / rear +38 to +49 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2010-2015 Mercedes-Benz GLK. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2010-2015 Mercedes-Benz GLK (X204) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7.5 +47.5; 17x7.5 +47.5 front / 17x8 +57 rear; 17x8 +57; 18x7.5 +47; 18x7.5 +47 front / 18x8 +57 rear; 18x8 +57; 19x7.5 +47; 19x7.5 +47 front / 19x8.5 +52 rear; 19x8.5 +52; 20x8 +42 front / 20x9 +54 rear; 20x8.5 +45 front / 20x9.5 +57 rear; 20x9 +54; 20x9.5 +57.
Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.