Mercedes-Benz R-Class (W251) 2006-2012 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz R-Class built from 2006 to 2012 (R320 CDI, R350, R350 BlueTEC, R500, R63 AMG).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years2006-2012
GenerationW251

Every 2006-2012 Mercedes-Benz R-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz R-Class (W251) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
R320 CDI2007-200817x7.5 +56
18x8 +67
19x8 +67
19x8.5 +64 front / 19x9.5 +64 rear
20x8.5 +61
20x9 +60
R3502006-201217x7.5 +56
18x8 +67
19x8 +67
19x8.5 +64 front / 19x9.5 +64 rear
20x8.5 +61
20x9 +60
R350 BlueTEC2009-201217x7.5 +56
18x8 +67
19x8 +67
19x8.5 +64
19x8.5 +64 front / 19x9.5 +64 rear
20x8.5 +61
20x9 +60
21x9 +60 front / 21x9 +48 rear
R5002006-200718x8 +67
19x8 +67
19x8.5 +64 front / 19x9.5 +64 rear
19x9.5 +64
20x8.5 +61
20x9 +60
21x9 +48
21x9 +60 front / 21x9 +48 rear
R63 AMG2007See factory sizes below

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 2006-2012 Mercedes-Benz R-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +56
18x8 +67
19x8 +67
19x8.5 +64
19x8.5 +64 front / 19x9.5 +64 rear
19x9.5 +64
20x8.5 +61
20x9 +60
21x9 +48
21x9 +60 front / 21x9 +48 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2006-2012 Mercedes-Benz R-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

R320 CDI, R350, R350 BlueTEC

DiameterWidthFront offsetRear offset
18-21"7.5"+34 to +66+21 to +66
18-21"8"+40 to +72+28 to +72
18-21"8.5"+47 to +69+34 to +75
18-21"9"+53 to +63+40 to +75
18-21"9.5"—+47 to +69
18-21"10"—+53 to +63

Wider still: 18x11 front — / rear +45 to +56; 19x11 front — / rear +45 to +56; 20x11 front — / rear +45 to +56; 21x11 front — / rear +45 to +56 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

R500, R63 AMG

DiameterWidthFront offsetRear offset
18-21"8"+40 to +75+28 to +75
18-21"8.5"+47 to +69+34 to +75
18-21"9"+53 to +63+40 to +75
18-21"9.5"—+47 to +69
18-21"10"—+53 to +63

Wider still: 18x11 front — / rear +45 to +56; 19x11 front — / rear +45 to +56; 20x11 front — / rear +45 to +56; 21x11 front — / rear +45 to +56 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2006-2012 Mercedes-Benz R-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

R320 CDI, R350, R350 BlueTEC

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

R500, R63 AMG

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.6 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

FAQ

What is the bolt pattern of the 2006-2012 Mercedes-Benz R-Class?

The 2006-2012 Mercedes-Benz R-Class (W251) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2006-2012 Mercedes-Benz R-Class from the factory?

Factory sizes: 17x7.5 +56; 18x8 +67; 19x8 +67; 19x8.5 +64; 19x8.5 +64 front / 19x9.5 +64 rear; 19x9.5 +64; 20x8.5 +61; 20x9 +60; 21x9 +48; 21x9 +60 front / 21x9 +48 rear.

What lug thread size does the 2006-2012 Mercedes-Benz R-Class use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2006-2012 Mercedes-Benz R-Class without modifications?

Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.