Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz SLK-Class built from 1998 to 2004 (SLK230, SLK320, SLK32 AMG).
Every 1998-2004 Mercedes-Benz SLK-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz SLK-Class (R170) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| SLK230 | 1998-2004 | 16x7 +34 16x7 +37 16x7 +34 front / 16x8 +36 rear 16x7 +37 front / 16x8 +30 rear 16x7 +37 front / 16x8 +34 rear 16x8 +30 16x8 +34 16x8 +36 |
| SLK320 | 2001-2004 | 16x7 +34 16x7 +37 16x8 +30 16x8 +36 17x7.5 +36 17x8.5 +30 18x9 +30 |
| SLK32 AMG | 2002-2004 | 17x7.5 +35 17x7.5 +35 front / 17x8.5 +30 rear 17x7.5 +37 front / 17x8.5 +34 rear 18x7.5 +35 front / 18x8.5 +30 rear 18x8 +30 front / 18x9 +30 rear |
Wheel sizes Mercedes-Benz fitted to the 1998-2004 Mercedes-Benz SLK-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x7 +37 |
| 16x7 +34 |
| 16x7 +37 |
| 16x7 +34 front / 16x8 +36 rear |
| 16x7 +37 front / 16x8 +34 rear |
| 16x7 +37 front / 16x8 +30 rear |
| 16x8 +30 |
| 16x8 +34 |
| 16x8 +36 |
| 17x7.5 +36 |
| 17x7.5 +36 front / 17x8.5 +30 rear |
| 17x8.5 +30 |
| 18x9 +30 |
Widths and offsets with Verified Fitment on the 1998-2004 Mercedes-Benz SLK-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-17" | 7" | +20 to +42 | +0 to +44 |
| 16-17" | 7.5" | +26 to +36 | +7 to +46 |
| 16-17" | 8" | — | +13 to +39 |
| 16-17" | 8.5" | — | +19 to +33 |
| 16-17" | 9" | — | +26 to +27 |
Wider still: 16x9.5 front — / rear +11 to +26; 16x10 front — / rear +18 to +20; 17x9.5 front — / rear +11 to +26; 17x10 front — / rear +18 to +20 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-18" | 7" | +20 to +42 | +0 to +44 |
| 16-18" | 7.5" | +26 to +36 | +7 to +46 |
| 16-18" | 8" | — | +13 to +39 |
| 16-18" | 8.5" | — | +19 to +33 |
| 16-18" | 9" | — | +26 to +27 |
Wider still: 16x9.5 front — / rear +11 to +26; 16x10 front — / rear +18 to +20; 17x9.5 front — / rear +11 to +26; 17x10 front — / rear +18 to +20; 18x9.5 front — / rear +11 to +26; 18x10 front — / rear +18 to +20 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-18" | 7.5" | +26 to +36 | +7 to +45 |
| 17-18" | 8" | — | +13 to +39 |
| 17-18" | 8.5" | — | +19 to +33 |
| 17-18" | 9" | — | +26 to +27 |
Wider still: 17x9.5 front — / rear +11 to +26; 17x10 front — / rear +18 to +20; 18x9.5 front — / rear +11 to +26; 18x10 front — / rear +18 to +20 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 1998-2004 Mercedes-Benz SLK-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)











Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)











The 1998-2004 Mercedes-Benz SLK-Class (R170) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 15x7 +37; 16x7 +34; 16x7 +37; 16x7 +34 front / 16x8 +36 rear; 16x7 +37 front / 16x8 +34 rear; 16x7 +37 front / 16x8 +30 rear; 16x8 +30; 16x8 +34; 16x8 +36; 17x7.5 +36; 17x7.5 +36 front / 17x8.5 +30 rear; 17x8.5 +30; 18x9 +30.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.