Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mercedes-Benz SLR McLaren built from 2005 to 2009 (Coupe, Roadster).
Every 2005-2009 Mercedes-Benz SLR McLaren uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz SLR McLaren (C199/R199) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| Coupe | 2005-2009 |
| Roadster | 2008-2009 |
Wheel sizes Mercedes-Benz fitted to the 2005-2009 Mercedes-Benz SLR McLaren from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x9 +45 front / 18x11.5 +44 rear |
| 19x9 +45 front / 19x11.5 +44 rear |
Widths and offsets with Verified Fitment on the 2005-2009 Mercedes-Benz SLR McLaren: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 9" | +28 to +51 | — |
| 18-20" | 9.5" | +34 to +44 | — |
| 18-20" | 11.5" | — | +27 to +49 |
| 18-20" | 12" | — | +33 to +43 |
Wider still: 18x13 front — / rear +25 to +36; 19x13 front — / rear +25 to +36; 20x13 front — / rear +25 to +36 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
The 2005-2009 Mercedes-Benz SLR McLaren (C199/R199) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x9 +45 front / 18x11.5 +44 rear; 19x9 +45 front / 19x11.5 +44 rear.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.