Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mercedes-Benz SLS AMG built from 2011 to 2015 (Coupe, Roadster, GT, Black Series).
Every 2011-2015 Mercedes-Benz SLS AMG uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz SLS AMG (C197/R197) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| Coupe | 2011-2015 |
| Roadster | 2012-2015 |
| GT | 2013-2015 |
| Black Series | 2014 |
Wheel sizes Mercedes-Benz fitted to the 2011-2015 Mercedes-Benz SLS AMG from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x9.5 +59 |
| 19x9.5 +62 |
| 19x9.5 +59 front / 20x11 +68 rear |
| 19x9.5 +62 front / 20x11 +69 rear |
| 19x10 +50 front / 20x12 +66 rear |
| 20x11 +68 |
| 20x12 +66 |
Widths and offsets with Verified Fitment on the 2011-2015 Mercedes-Benz SLS AMG: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-20" | 9.5" | +42 to +67 | +32 to +69 |
| 19-20" | 10" | +48 to +61 | +38 to +75 |
| 19-20" | 10.5" | +55 | +45 to +75 |
| 19-20" | 11" | — | +51 to +74 |
| 19-20" | 11.5" | — | +57 to +68 |
Wider still: 19x12.5 front — / rear +49 to +61; 20x12.5 front — / rear +49 to +61 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2011-2015 Mercedes-Benz SLS AMG. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)






The 2011-2015 Mercedes-Benz SLS AMG (C197/R197) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 19x9.5 +59; 19x9.5 +62; 19x9.5 +59 front / 20x11 +68 rear; 19x9.5 +62 front / 20x11 +69 rear; 19x10 +50 front / 20x12 +66 rear; 20x11 +68; 20x12 +66.
Bolt-on sizes run from 19" to 20" in diameter; see the size table for the offset range at each width.