Mitsubishi Galant (E50) 1994-1998 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mitsubishi Galant built from 1994 to 1998 (S, ES, LS).

Fitment specs

Bolt pattern4X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years1994-1998
GenerationE50

Every 1994-1998 Mitsubishi Galant uses a 4X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mitsubishi Galant (E50) and the model years each was sold. All of them share the 4X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
S1994-199814x5.5 +46
ES1994-199814x5.5 +46
LS1994-199815x6 +46

Factory wheel sizes

Wheel sizes Mitsubishi fitted to the 1994-1998 Mitsubishi Galant from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
14x5.5 +46
15x6 +46
16x6 +46
16x6.5 +42
16x6.5 +46
16x6.5 +48
17x7 +42
17x7 +46

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1994-1998 Mitsubishi Galant: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

S, ES

DiameterWidthOffset range
14-16"5.5"+29 to +51
14-16"6"+35 to +45

Wider still: 14x7 +27 to +38; 15x7 +27 to +38; 16x7 +27 to +38 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).

LS

DiameterWidthOffset range
15-16"6"+35 to +46

Wider still: 15x7 +27 to +38; 16x7 +27 to +38 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).

FAQ

What is the bolt pattern of the 1994-1998 Mitsubishi Galant?

The 1994-1998 Mitsubishi Galant (E50) uses a 4X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 1994-1998 Mitsubishi Galant from the factory?

Factory sizes: 14x5.5 +46; 15x6 +46; 16x6 +46; 16x6.5 +42; 16x6.5 +46; 16x6.5 +48; 17x7 +42; 17x7 +46.

What lug thread size does the 1994-1998 Mitsubishi Galant use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1994-1998 Mitsubishi Galant without modifications?

Bolt-on sizes run from 14" to 16" in diameter; see the size table for the offset range at each width.