Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mitsubishi i-MiEV built from 2012 to 2017 (ES, SE).
Every 2012-2017 Mitsubishi i-MiEV uses a 4X100 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mitsubishi i-MiEV (HA) and the model years each was sold. All of them share the 4X100 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| ES | 2012-2017 | 15x4 +35 front / 15x5 +35 rear 15x5 +35 |
| SE | 2012-2017 | 15x4 +35 front / 15x5 +35 rear 15x5 +35 |
Wheel sizes Mitsubishi fitted to the 2012-2017 Mitsubishi i-MiEV from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x4 +35 front / 15x5 +35 rear |
| 15x5 +35 |
Widths and offsets with Verified Fitment on the 2012-2017 Mitsubishi i-MiEV: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 15-16" | 4" | +5 to +45 | — |
| 15-16" | 4.5" | +12 to +47 | — |
| 15-16" | 5" | +18 to +41 | +18 to +41 |
| 15-16" | 5.5" | +24 to +34 | +24 to +34 |
Wider still: 15x6.5 front +16 to +27 / rear +16 to +27; 16x6.5 front +16 to +27 / rear +16 to +27 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).
The 2012-2017 Mitsubishi i-MiEV (HA) uses a 4X100 bolt pattern and a 56.1 mm center bore.
Factory sizes: 15x4 +35 front / 15x5 +35 rear; 15x5 +35.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 16" in diameter; see the size table for the offset range at each width.