Mitsubishi Montero (V20) 1992-1999 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mitsubishi Montero built from 1992 to 1999 (Base, LS, SR).

Fitment specs

Bolt pattern6X139.7
Center bore108.1 mm
Lug threadM12x1.5
Model years1992-1999
GenerationV20

Every 1992-1999 Mitsubishi Montero uses a 6X139.7 bolt pattern with a 108.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 108.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mitsubishi Montero (V20) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1992-1999See factory sizes below
LS1992-199915x6 +33
15x7 +10
SR1992-199915x6 +33
15x7 +10

Factory wheel sizes

Wheel sizes Mitsubishi fitted to the 1992-1999 Mitsubishi Montero from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +33
15x7 +10
16x7 +10
17x7.5 +0

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1992-1999 Mitsubishi Montero: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"6"+16 to +38
15-17"6.5"+22 to +32

Wider still: 15x7.5 +14 to +25; 16x7.5 +14 to +25; 17x7.5 +14 to +25 fit with modifications (trim front mud flaps / inner liner at full lock, roll fender lips, 1-2 in. lift (spacers) for larger all-terrain tires).

FAQ

What is the bolt pattern of the 1992-1999 Mitsubishi Montero?

The 1992-1999 Mitsubishi Montero (V20) uses a 6X139.7 bolt pattern and a 108.1 mm center bore.

What size wheels came on the 1992-1999 Mitsubishi Montero from the factory?

Factory sizes: 15x6 +33; 15x7 +10; 16x7 +10; 17x7.5 +0.

What lug thread size does the 1992-1999 Mitsubishi Montero use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1992-1999 Mitsubishi Montero without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.