Nissan 370Z (Z34) 2009-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Nissan 370Z built from 2009 to 2020 (Base, Sport, Touring, 40th Anniversary, Heritage Edition, 50th Anniversary, NISMO).

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2009-2020
GenerationZ34

Every 2009-2020 Nissan 370Z uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Nissan 370Z (Z34) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2009-2020See factory sizes below
Sport2014-2020See factory sizes below
Touring2009-2020See factory sizes below
40th Anniversary2010See factory sizes below
Heritage Edition2018See factory sizes below
50th Anniversary202019x9 +47 front / 19x10 +30 rear
19x9.5 +40 front / 19x10.5 +23 rear
NISMO2009-202019x9 +47 front / 19x10 +30 rear
19x9.5 +40 front / 19x10.5 +23 rear

Factory wheel sizes

Wheel sizes Nissan fitted to the 2009-2020 Nissan 370Z from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +43 front / 18x9 +15 rear
19x9 +47 front / 19x10 +30 rear
19x9.5 +40 front / 19x10.5 +23 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2009-2020 Nissan 370Z: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Sport, Touring, 40th Anniversary, Heritage Edition

DiameterWidthFront offsetRear offset
18-20"8"+4 to +53—
18-20"8.5"+10 to +58—
18-20"9"+16 to +52-13 to +25
18-20"9.5"+23 to +45-7 to +31
18-20"10"+29 to +39-1 to +35
18-20"10.5"—+6 to +28
18-20"11"—+12 to +22

Wider still: 18x12 front — / rear +4 to +15; 19x12 front — / rear +4 to +15; 20x12 front — / rear +4 to +15 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

50th Anniversary, NISMO

DiameterWidthFront offsetRear offset
19-20"9"+16 to +52—
19-20"9.5"+23 to +45—
19-20"10"+29 to +39-1 to +35
19-20"10.5"—+6 to +28
19-20"11"—+12 to +22

Wider still: 19x12 front — / rear +4 to +15; 20x12 front — / rear +4 to +15 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2009-2020 Nissan 370Z. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, Sport, Touring, 40th Anniversary, Heritage Edition

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

50th Anniversary, NISMO

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2009-2020 Nissan 370Z?

The 2009-2020 Nissan 370Z (Z34) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2009-2020 Nissan 370Z from the factory?

Factory sizes: 18x8 +43 front / 18x9 +15 rear; 19x9 +47 front / 19x10 +30 rear; 19x9.5 +40 front / 19x10.5 +23 rear.

What lug thread size does the 2009-2020 Nissan 370Z use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2009-2020 Nissan 370Z without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.