Nissan Altima (L33) 2013-2018 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Nissan Altima built from 2013 to 2018 (2.5, S, SR, SV, SL).

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2013-2018
GenerationL33

Every 2013-2018 Nissan Altima uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Nissan Altima (L33) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
2.52013-2018See factory sizes below
S2013-2018See factory sizes below
SR2016-2018See factory sizes below
SV2013-201817x7.5 +50
SL2013-201817x7.5 +50

Factory wheel sizes

Wheel sizes Nissan fitted to the 2013-2018 Nissan Altima from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +50
17x7.5 +50
18x7.5 +55

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2013-2018 Nissan Altima: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

2.5, S, SR

DiameterWidthOffset range
16-20"7.5"+28 to +55
16-20"8"+34 to +49
16-20"8.5"+40 to +43

Wider still: 16x9 +31 to +42; 17x9 +31 to +42; 18x9 +31 to +42; 19x9 +31 to +42; 20x9 +31 to +42 fit with modifications (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger).

SV, SL

DiameterWidthOffset range
17-20"7.5"+28 to +55
17-20"8"+34 to +49
17-20"8.5"+40 to +43

Wider still: 17x9 +31 to +42; 18x9 +31 to +42; 19x9 +31 to +42; 20x9 +31 to +42 fit with modifications (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2013-2018 Nissan Altima. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

2.5, S, SR

Modifications Required (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger)

SV, SL

Modifications Required (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2013-2018 Nissan Altima?

The 2013-2018 Nissan Altima (L33) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2013-2018 Nissan Altima from the factory?

Factory sizes: 16x7 +50; 17x7.5 +50; 18x7.5 +55.

What lug thread size does the 2013-2018 Nissan Altima use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2013-2018 Nissan Altima without modifications?

Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.