Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Nissan Ariya built from 2023 to 2025 (Engage, Venture+, Evolve+, Empower+, Premiere, Platinum+).
Every 2023-2025 Nissan Ariya uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Nissan Ariya and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Engage | 2023-2025 | 19x7.5 +45 |
| Venture+ | 2023-2025 | 19x7.5 +45 |
| Evolve+ | 2023-2025 | 19x7.5 +45 |
| Empower+ | 2023-2025 | 19x7.5 +45 |
| Premiere | 2023 | See factory sizes below |
| Platinum+ | 2023-2025 | 19x7.5 +45 |
Wheel sizes Nissan fitted to the 2023-2025 Nissan Ariya from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x7.5 +45 |
| 20x8 +45 |
Widths and offsets with Verified Fitment on the 2023-2025 Nissan Ariya: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-21" | 7.5" | +28 to +50 |
| 19-21" | 8" | +34 to +44 |
Wider still: 19x9 +26 to +37; 20x9 +26 to +37; 21x9 +26 to +37 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2025 Nissan Ariya. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels)











The 2023-2025 Nissan Ariya uses a 5X114.3 bolt pattern and a 66.1 mm center bore.
Factory sizes: 19x7.5 +45; 20x8 +45.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.