Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan Armada built from 2025 to 2026 (Platinum, Platinum Reserve, Pro-4X, SL, SV, Nismo).
Every 2025-2026 Nissan Armada uses a 6X139.7 bolt pattern with a 77.8 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 77.8 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Nissan Armada and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| Platinum | 2025-2026 |
| Platinum Reserve | 2025-2026 |
| Pro-4X | 2025-2026 |
| SL | 2025-2026 |
| SV | 2025-2026 |
| Nismo | 2026 |
Wheel sizes Nissan fitted to the 2025-2026 Nissan Armada from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +45 |
| 20x8.5 +45 |
| 22x8.5 +45 |
Widths and offsets with Verified Fitment on the 2025-2026 Nissan Armada: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-24" | 8" | +28 to +50 |
| 18-24" | 8.5" | +34 to +44 |
Wider still: 18x9.5 +26 to +37; 19x9.5 +26 to +37; 20x9.5 +26 to +37; 21x9.5 +26 to +37; 22x9.5 +26 to +37; 23x9.5 +26 to +37… fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2025-2026 Nissan Armada. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in)







The 2025-2026 Nissan Armada uses a 6X139.7 bolt pattern and a 77.8 mm center bore.
Factory sizes: 18x8 +45; 20x8.5 +45; 22x8.5 +45.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 24" in diameter; see the size table for the offset range at each width.