Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan NV Cargo built from 2012 to 2021 (1500 S, 1500 SV, 2500 HD S, 2500 HD SV).
Every 2012-2021 Nissan NV Cargo uses a 8X165.1 bolt pattern with a 121 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 121 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Nissan NV Cargo (F80) and the model years each was sold. All of them share the 8X165.1 bolt pattern.
| Submodel | Years |
|---|---|
| 1500 S | 2012-2021 |
| 1500 SV | 2012-2021 |
| 2500 HD S | 2012-2021 |
| 2500 HD SV | 2012-2021 |
Wheel sizes Nissan fitted to the 2012-2021 Nissan NV Cargo from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +40 |
Widths and offsets with Verified Fitment on the 2012-2021 Nissan NV Cargo: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-18" | 7.5" | +23 to +45 |
| 17-18" | 8" | +29 to +39 |
Wider still: 17x9 +21 to +32; 18x9 +21 to +32 fit with modifications (roll fender lips, trim plastic fender liners, hub-centric rings if the wheel bore is larger).
The 2012-2021 Nissan NV Cargo (F80) uses a 8X165.1 bolt pattern and a 121 mm center bore.
Factory sizes: 17x7.5 +40.
Bolt-on sizes run from 17" to 18" in diameter; see the size table for the offset range at each width.