Nissan Quest 2nd Gen 1999-2002 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Nissan Quest built from 1999 to 2002 (XE, SE, GLE).

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years1999-2002
Generation2nd Gen

Every 1999-2002 Nissan Quest uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Nissan Quest (2nd Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
XE1999-200215x5.5 +45
15x6.5 +45
SE1999-200216x6 +45
GLE1999-200215x5.5 +45
15x6 +45
16x6 +45

Factory wheel sizes

Wheel sizes Nissan fitted to the 1999-2002 Nissan Quest from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x5.5 +45
15x6 +45
16x6 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1999-2002 Nissan Quest: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

XE, GLE

DiameterWidthOffset range
15-18"5.5"+22 to +55
15-18"6"+28 to +50
15-18"6.5"+34 to +44

Wider still: 15x7.5 +26 to +37; 16x7.5 +26 to +37; 17x7.5 +26 to +37; 18x7.5 +26 to +37 fit with modifications (roll fender lips, trim plastic fender liners, hub-centric rings if the wheel bore is larger).

SE

DiameterWidthOffset range
16-18"6"+28 to +50
16-18"6.5"+34 to +44

Wider still: 16x7.5 +26 to +37; 17x7.5 +26 to +37; 18x7.5 +26 to +37 fit with modifications (roll fender lips, trim plastic fender liners, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1999-2002 Nissan Quest. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

XE, GLE

Modifications Required (roll fender lips, trim plastic fender liners, hub-centric rings if the wheel bore is larger)

SE

Modifications Required (roll fender lips, trim plastic fender liners, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 1999-2002 Nissan Quest?

The 1999-2002 Nissan Quest (2nd Gen) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 1999-2002 Nissan Quest from the factory?

Factory sizes: 15x5.5 +45; 15x6 +45; 16x6 +45.

What lug thread size does the 1999-2002 Nissan Quest use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 1999-2002 Nissan Quest without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.