Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Nissan Titan XD built from 2016 to 2024 (Platinum Reserve, PRO-4X, S, SL, SV).
Every 2016-2024 Nissan Titan XD uses a 6X139.7 bolt pattern with a 77.8 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 77.8 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Nissan Titan XD (A61) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| Platinum Reserve | 2016-2024 |
| PRO-4X | 2016-2024 |
| S | 2016-2023 |
| SL | 2016-2020 |
| SV | 2016-2024 |
Wheel sizes Nissan fitted to the 2016-2024 Nissan Titan XD from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +44 |
| 18x7.5 +41 |
| 20x7.5 +41 |
Widths and offsets with Verified Fitment on the 2016-2024 Nissan Titan XD: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-22" | 7.5" | +27 to +49 |
| 17-22" | 8" | +33 to +43 |
Wider still: 17x9 +25 to +36; 18x9 +25 to +36; 19x9 +25 to +36; 20x9 +25 to +36; 21x9 +25 to +36; 22x9 +25 to +36 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2024 Nissan Titan XD. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in)






The 2016-2024 Nissan Titan XD (A61) uses a 6X139.7 bolt pattern and a 77.8 mm center bore.
Factory sizes: 17x7.5 +44; 18x7.5 +41; 20x7.5 +41.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.