Porsche 718 Boxster (982) 2017-2025 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche 718 Boxster built from 2017 to 2025 (Base, S, GTS, T, 718 Spyder).

Fitment specs

Bolt pattern5X130
Center bore71.6 mm
Model years2017-2025
Generation982

Every 2017-2025 Porsche 718 Boxster uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Porsche 718 Boxster (982) and the model years each was sold. All of them share the 5X130 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2017-202518x8 +57 front / 18x9.5 +49 rear
19x8 +57 front / 19x10 +49 rear
19x8 +57 front / 19x10 +45 rear
20x8 +57 front / 20x10 +45 rear
20x8.5 +57 front / 20x10.5 +47 rear
S2017-202519x10 +45
19x10 +49
20x10 +45
20x10.5 +47
GTS2018-202520x8 +57 front / 20x10 +45 rear
20x8.5 +57 front / 20x10.5 +47 rear
20x10.5 +47
T2020-202520x10 +45
20x10.5 +47
718 Spyder2020-2025See factory sizes below

Factory wheel sizes

Wheel sizes Porsche fitted to the 2017-2025 Porsche 718 Boxster from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +57 front / 18x9.5 +49 rear
19x8 +57 front / 19x10 +49 rear
19x8 +57 front / 19x10 +40 rear
19x8 +57 front / 19x10 +45 rear
19x10 +45
19x10 +49
20x8 +57 front / 20x10 +45 rear
20x8.5 +57 front / 20x10.5 +47 rear
20x10 +45
20x10.5 +47

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2017-2025 Porsche 718 Boxster: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, 718 Spyder

DiameterWidthFront offsetRear offset
18-21"8"+33 to +67—
18-21"8.5"+40 to +62—
18-21"9"+46 to +56—
18-21"9.5"—+17 to +59
18-21"10"—+23 to +59
18-21"10.5"—+30 to +52
18-21"11"—+36 to +46

Wider still: 18x12 front — / rear +28 to +39; 19x12 front — / rear +28 to +39; 20x12 front — / rear +28 to +39; 21x12 front — / rear +28 to +39 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

S

DiameterWidthFront offsetRear offset
19-21"10"+45+23 to +55
19-21"10.5"—+30 to +52
19-21"11"—+36 to +46

Wider still: 19x12 front — / rear +28 to +39; 20x12 front — / rear +28 to +39; 21x12 front — / rear +28 to +39 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

GTS

DiameterWidthFront offsetRear offset
20-21"8"+33 to +67—
20-21"8.5"+40 to +62—
20-21"9"+46 to +56—
20-21"10"—+23 to +55
20-21"10.5"—+30 to +52
20-21"11"—+36 to +46

Wider still: 20x12 front — / rear +28 to +39; 21x12 front — / rear +28 to +39 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

T

DiameterWidthFront offsetRear offset
20-21"10"+45+23 to +55
20-21"10.5"—+30 to +52
20-21"11"—+36 to +46

Wider still: 20x12 front — / rear +28 to +39; 21x12 front — / rear +28 to +39 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2025 Porsche 718 Boxster. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, 718 Spyder

Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)

S

Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)

GTS

Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)

T

Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)

FAQ

What is the bolt pattern of the 2017-2025 Porsche 718 Boxster?

The 2017-2025 Porsche 718 Boxster (982) uses a 5X130 bolt pattern and a 71.6 mm center bore.

What size wheels came on the 2017-2025 Porsche 718 Boxster from the factory?

Factory sizes: 18x8 +57 front / 18x9.5 +49 rear; 19x8 +57 front / 19x10 +49 rear; 19x8 +57 front / 19x10 +40 rear; 19x8 +57 front / 19x10 +45 rear; 19x10 +45; 19x10 +49; 20x8 +57 front / 20x10 +45 rear; 20x8.5 +57 front / 20x10.5 +47 rear; 20x10 +45; 20x10.5 +47.

What aftermarket wheel sizes fit the 2017-2025 Porsche 718 Boxster without modifications?

Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.