Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche 718 Cayman built from 2017 to 2025 (Base, S, GTS, T, GT4).
Every 2017-2025 Porsche 718 Cayman uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Porsche 718 Cayman (982) and the model years each was sold. All of them share the 5X130 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2017-2025 | 18x9.5 +49 19x10 +45 19x10 +49 20x10 +45 20x10.5 +47 |
| S | 2017-2025 | See factory sizes below |
| GTS | 2018-2025 | 20x10 +45 20x10.5 +47 |
| T | 2020-2025 | See factory sizes below |
| GT4 | 2020-2025 | 20x11 +50 |
Wheel sizes Porsche fitted to the 2017-2025 Porsche 718 Cayman from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +57 front / 18x9.5 +49 rear |
| 18x9.5 +49 |
| 19x8 +57 front / 19x10 +40 rear |
| 19x8 +57 front / 19x10 +45 rear |
| 19x10 +45 |
| 19x10 +49 |
| 20x8 +57 front / 20x10 +45 rear |
| 20x8.5 +57 front / 20x10.5 +47 rear |
| 20x8.5 +61 front / 20x11 +50 rear |
| 20x10 +45 |
| 20x10.5 +47 |
| 20x11 +50 |
| 21x8.5 +60 front / 20x11 +50 rear |
Widths and offsets with Verified Fitment on the 2017-2025 Porsche 718 Cayman: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 9.5" | +32 to +54 | +14 to +59 |
| 18-21" | 10" | +38 to +48 | +20 to +65 |
| 18-21" | 10.5" | — | +27 to +62 |
| 18-21" | 11" | — | +33 to +55 |
| 18-21" | 11.5" | — | +39 to +49 |
Wider still: 18x12.5 front — / rear +31 to +42; 19x12.5 front — / rear +31 to +42; 20x12.5 front — / rear +31 to +42; 21x12.5 front — / rear +31 to +42 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8" | +13 to +67 | — |
| 18-21" | 8.5" | +19 to +67 | — |
| 18-21" | 9" | +25 to +61 | — |
| 18-21" | 9.5" | +32 to +54 | +14 to +59 |
| 18-21" | 10" | +38 to +48 | +20 to +65 |
| 18-21" | 10.5" | — | +27 to +62 |
| 18-21" | 11" | — | +33 to +55 |
| 18-21" | 11.5" | — | +39 to +49 |
Wider still: 18x12.5 front — / rear +31 to +42; 19x12.5 front — / rear +31 to +42; 20x12.5 front — / rear +31 to +42; 21x12.5 front — / rear +31 to +42 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20-21" | 10" | +38 to +48 | +20 to +55 |
| 20-21" | 10.5" | — | +27 to +61 |
| 20-21" | 11" | — | +33 to +55 |
| 20-21" | 11.5" | — | +39 to +49 |
Wider still: 20x12.5 front — / rear +31 to +42; 21x12.5 front — / rear +31 to +42 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20-21" | 11" | +50 | +33 to +55 |
| 20-21" | 11.5" | — | +39 to +49 |
Wider still: 20x12.5 front — / rear +31 to +42; 21x12.5 front — / rear +31 to +42 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2025 Porsche 718 Cayman. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
The 2017-2025 Porsche 718 Cayman (982) uses a 5X130 bolt pattern and a 71.6 mm center bore.
Factory sizes: 18x8 +57 front / 18x9.5 +49 rear; 18x9.5 +49; 19x8 +57 front / 19x10 +40 rear; 19x8 +57 front / 19x10 +45 rear; 19x10 +45; 19x10 +49; 20x8 +57 front / 20x10 +45 rear; 20x8.5 +57 front / 20x10.5 +47 rear; 20x8.5 +61 front / 20x11 +50 rear; 20x10 +45; 20x10.5 +47; 20x11 +50; 21x8.5 +60 front / 20x11 +50 rear.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.