Porsche Macan (95B) 2015-2025 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche Macan built from 2015 to 2025 (Base, S, GTS, Turbo, T).

Fitment specs

Bolt pattern5X112
Center bore66.5 mm
Lug threadM14x1.5
Model years2015-2025
Generation95B

Every 2015-2025 Porsche Macan uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Porsche Macan (95B) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2017-2025See factory sizes below
S2015-202518x8 +21 front / 18x9 +21 rear
20x9 +26 front / 20x10 +19 rear
GTS2017-202519x8 +21 front / 19x9 +21 rear
20x9 +26 front / 20x10 +19 rear
21x9 +26 front / 21x10 +19 rear
Turbo2015-202119x9 +21
20x10 +19
21x10 +19
T2023-202520x9 +26 front / 20x10 +19 rear

Factory wheel sizes

Wheel sizes Porsche fitted to the 2015-2025 Porsche Macan from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +21 front / 18x9 +21 rear
18x9 +21
19x8 +21 front / 19x9 +21 rear
19x8.5 +21 front / 19x9 +21 rear
19x9 +21
20x9 +26 front / 20x10 +19 rear
20x10 +19
21x9 +26 front / 21x10 +19 rear
21x9.5 +26 front / 21x10 +19 rear
21x10 +19

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2015-2025 Porsche Macan: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, S

DiameterWidthFront offsetRear offset
18-23"8"-10 to +31—
18-23"8.5"-4 to +37—
18-23"9"+2 to +38-11 to +31
18-23"9.5"+9 to +31-5 to +31
18-23"10"+15 to +25+2 to +24
18-23"10.5"—+8 to +18

Wider still: 18x11.5 front — / rear +0 to +11; 19x11.5 front — / rear +0 to +11; 20x11.5 front — / rear +0 to +11; 21x11.5 front — / rear +0 to +11; 22x11.5 front — / rear +0 to +11; 23x11.5 front — / rear +0 to +11 fit with modifications (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub).

GTS

DiameterWidthFront offsetRear offset
19-23"8"-10 to +31—
19-23"8.5"-4 to +37—
19-23"9"+2 to +38-11 to +31
19-23"9.5"+9 to +31-5 to +31
19-23"10"+15 to +25+2 to +24
19-23"10.5"—+8 to +18

Wider still: 19x11.5 front — / rear +0 to +11; 20x11.5 front — / rear +0 to +11; 21x11.5 front — / rear +0 to +11; 22x11.5 front — / rear +0 to +11; 23x11.5 front — / rear +0 to +11 fit with modifications (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub).

Turbo

DiameterWidthFront offsetRear offset
19-23"9"+2 to +31-11 to +31
19-23"9.5"+9 to +31-5 to +31
19-23"10"+15 to +25+2 to +24
19-23"10.5"—+8 to +18

Wider still: 19x11.5 front — / rear +0 to +11; 20x11.5 front — / rear +0 to +11; 21x11.5 front — / rear +0 to +11; 22x11.5 front — / rear +0 to +11; 23x11.5 front — / rear +0 to +11 fit with modifications (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub).

T

DiameterWidthFront offsetRear offset
20-23"9"+2 to +36—
20-23"9.5"+9 to +31—
20-23"10"+15 to +25+2 to +24
20-23"10.5"—+8 to +18

Wider still: 20x11.5 front — / rear +0 to +11; 21x11.5 front — / rear +0 to +11; 22x11.5 front — / rear +0 to +11; 23x11.5 front — / rear +0 to +11 fit with modifications (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2015-2025 Porsche Macan. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, S

Modifications Required (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub)

GTS

Modifications Required (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub)

Turbo

Modifications Required (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub)

T

Modifications Required (trim front wheel-arch liner, extra negative camber via alignment eccentrics, hub-centric rings if wheel bore is larger than the hub)

FAQ

What is the bolt pattern of the 2015-2025 Porsche Macan?

The 2015-2025 Porsche Macan (95B) uses a 5X112 bolt pattern and a 66.5 mm center bore.

What size wheels came on the 2015-2025 Porsche Macan from the factory?

Factory sizes: 18x8 +21 front / 18x9 +21 rear; 18x9 +21; 19x8 +21 front / 19x9 +21 rear; 19x8.5 +21 front / 19x9 +21 rear; 19x9 +21; 20x9 +26 front / 20x10 +19 rear; 20x10 +19; 21x9 +26 front / 21x10 +19 rear; 21x9.5 +26 front / 21x10 +19 rear; 21x10 +19.

What lug thread size does the 2015-2025 Porsche Macan use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2015-2025 Porsche Macan without modifications?

Bolt-on sizes run from 18" to 23" in diameter; see the size table for the offset range at each width.