Porsche Taycan (J1) 2020-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche Taycan built from 2020 to 2026 (Base, 4, 4S, GTS, Turbo, Turbo S, 4 Cross Turismo, Turbo GT).

Fitment specs

Bolt pattern5X130
Center bore71.6 mm
Lug threadM14x1.5
Model years2020-2026
GenerationJ1

Every 2020-2026 Porsche Taycan uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Porsche Taycan (J1) and the model years each was sold. All of them share the 5X130 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2021-2026See factory sizes below
42025-202619x8 +50 front / 19x10 +47 rear
20x9 +54 front / 20x11 +60 rear
21x9.5 +60 front / 21x11.5 +66 rear
4S2020-202619x8 +50 front / 19x10 +47 rear
GTS2022-202620x9 +54 front / 20x11 +60 rear
Turbo2020-202620x11 +60
21x11.5 +66
Turbo S2020-202620x11 +60
21x11.5 +66
4 Cross Turismo2021-202619x8 +50 front / 19x10 +47 rear
Turbo GT2025-202621x9.5 +60 front / 21x11.5 +66 rear

Factory wheel sizes

Wheel sizes Porsche fitted to the 2020-2026 Porsche Taycan from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
19x8 +50 front / 19x10 +47 rear
19x10 +47
20x9 +54 front / 20x11 +60 rear
20x11 +60
21x9.5 +60 front / 21x11.5 +66 rear
21x11.5 +66

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2020-2026 Porsche Taycan: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, 4, 4S, 4 Cross Turismo

DiameterWidthFront offsetRear offset
19-22"8"+24 to +60—
19-22"8.5"+30 to +66—
19-22"9"+36 to +72—
19-22"9.5"+43 to +65—
19-22"10"+49 to +59+30 to +57
19-22"10.5"—+36 to +63
19-22"11"—+42 to +70
19-22"11.5"—+49 to +71
19-22"12"—+55 to +65

Wider still: 19x13 front — / rear +47 to +58; 20x13 front — / rear +47 to +58; 21x13 front — / rear +47 to +58; 22x13 front — / rear +47 to +58 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

GTS

DiameterWidthFront offsetRear offset
20-22"9"+36 to +64—
20-22"9.5"+43 to +65—
20-22"10"+49 to +59—
20-22"11"—+42 to +70
20-22"11.5"—+49 to +71
20-22"12"—+55 to +65

Wider still: 20x13 front — / rear +47 to +58; 21x13 front — / rear +47 to +58; 22x13 front — / rear +47 to +58 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Turbo, Turbo S

DiameterWidthFront offsetRear offset
20-22"11"+60+42 to +70
20-22"11.5"—+49 to +71
20-22"12"—+55 to +65

Wider still: 20x13 front — / rear +47 to +58; 21x13 front — / rear +47 to +58; 22x13 front — / rear +47 to +58 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Turbo GT

DiameterWidthFront offsetRear offset
21-22"9.5"+43 to +65—
21-22"10"+49 to +59—
21-22"11.5"—+49 to +71
21-22"12"—+55 to +65

Wider still: 21x13 front — / rear +47 to +58; 22x13 front — / rear +47 to +58 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2026 Porsche Taycan. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, 4, 4S, 4 Cross Turismo

Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)

GTS

Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)

Turbo, Turbo S

Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)

Turbo GT

Modifications Required (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers)

FAQ

What is the bolt pattern of the 2020-2026 Porsche Taycan?

The 2020-2026 Porsche Taycan (J1) uses a 5X130 bolt pattern and a 71.6 mm center bore.

What size wheels came on the 2020-2026 Porsche Taycan from the factory?

Factory sizes: 19x8 +50 front / 19x10 +47 rear; 19x10 +47; 20x9 +54 front / 20x11 +60 rear; 20x11 +60; 21x9.5 +60 front / 21x11.5 +66 rear; 21x11.5 +66.

What lug thread size does the 2020-2026 Porsche Taycan use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2020-2026 Porsche Taycan without modifications?

Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.