Ram 1500 Classic (DS) 2019-2024 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ram 1500 Classic built from 2019 to 2024 (Tradesman, Express, Big Horn, Lone Star, SLT, Warlock).

Fitment specs

Bolt pattern5X139.7
Center bore77.8 mm
Lug threadM14x1.5
Model years2019-2024
GenerationDS

Every 2019-2024 Ram 1500 Classic uses a 5X139.7 bolt pattern with a 77.8 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 77.8 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ram 1500 Classic (DS) and the model years each was sold. All of them share the 5X139.7 bolt pattern.

SubmodelYears
Tradesman2019-2024
Express2019-2024
Big Horn2019-2024
Lone Star2019-2024
SLT2019-2024
Warlock2019-2024

Factory wheel sizes

Wheel sizes Ram fitted to the 2019-2024 Ram 1500 Classic from the factory. Offsets are ET in millimeters.

Factory size
17x7 +25
18x8 +20
19x8 +20
20x8 +19
22x9 +19

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2019-2024 Ram 1500 Classic: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-22"7"-11 to +35
17-22"7.5"-4 to +31
17-22"8"+2 to +24
17-22"8.5"+8 to +18

Wider still: 17x9.5 +0 to +11; 18x9.5 +0 to +11; 19x9.5 +0 to +11; 20x9.5 +0 to +11; 21x9.5 +0 to +11; 22x9.5 +0 to +11 fit with modifications (2 in front leveling kit for 33 in tires, trim front bumper valance and inner fender liners, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2019-2024 Ram 1500 Classic?

The 2019-2024 Ram 1500 Classic (DS) uses a 5X139.7 bolt pattern and a 77.8 mm center bore.

What size wheels came on the 2019-2024 Ram 1500 Classic from the factory?

Factory sizes: 17x7 +25; 18x8 +20; 19x8 +20; 20x8 +19; 22x9 +19.

What lug thread size does the 2019-2024 Ram 1500 Classic use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2019-2024 Ram 1500 Classic without modifications?

Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.