Ram 3500 (DJ/D2) 2011-2018 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ram 3500 built from 2011 to 2018 (ST, Tradesman, SLT, Big Horn, Lone Star, Laramie, Laramie Longhorn, Limited).

Fitment specs

Bolt pattern8X165.1
Center bore121.3 mm
Lug threadM14x1.5
Model years2011-2018
GenerationDJ/D2

Every 2011-2018 Ram 3500 uses a 8X165.1 bolt pattern with a 121.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 121.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ram 3500 (DJ/D2) and the model years each was sold. All of them share the 8X165.1 bolt pattern.

SubmodelYearsFactory wheel sizes
ST2011-201217x8 +42
Tradesman2012-201818x8 +20
18x8 +43
SLT2011-201817x8 +42
18x8 +20
18x8 +43
Big Horn2013-201818x8 +20
18x8 +43
Lone Star2013-201818x8 +20
18x8 +43
Laramie2011-201817x8 +42
18x8 +20
18x8 +43
Laramie Longhorn2011-201817x8 +42
18x8 +20
18x8 +43
Limited2016-201818x8 +20
18x8 +43
20x8 +54
20x8 +55

Factory wheel sizes

Wheel sizes Ram fitted to the 2011-2018 Ram 3500 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x6 +136
17x8 +42
18x8 +20
18x8 +43
20x8 +55
20x9 +45
22x9 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2011-2018 Ram 3500: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

ST, SLT, Laramie, Laramie Longhorn

DiameterWidthOffset range
17-19"8"+42 to +52

Tradesman, Big Horn, Lone Star

DiameterWidthOffset range
18-19"8"+20 to +30

Limited

DiameterWidthOffset range
18-20"8"+20 to +30

FAQ

What is the bolt pattern of the 2011-2018 Ram 3500?

The 2011-2018 Ram 3500 (DJ/D2) uses a 8X165.1 bolt pattern and a 121.3 mm center bore.

What size wheels came on the 2011-2018 Ram 3500 from the factory?

Factory sizes: 17x6 +136; 17x8 +42; 18x8 +20; 18x8 +43; 20x8 +55; 20x9 +45; 22x9 +45.

What lug thread size does the 2011-2018 Ram 3500 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2011-2018 Ram 3500 without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.