Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ram C/V Tradesman built from 2013 to 2015.
Every 2013-2015 Ram C/V Tradesman uses a 5X127 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ram C/V Tradesman (RT) and the model years each was sold. All of them share the 5X127 bolt pattern.
| Submodel | Years |
|---|---|
| Tradesman | 2013-2015 |
Wheel sizes Ram fitted to the 2013-2015 Ram C/V Tradesman from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +40 |
| 17x6.5 +40 |
| 17x7 +40 |
| 18x6.5 +40 |
| 18x7 +40 |
| 19x7 +40 |
| 19x7.5 +40 |
Widths and offsets with Verified Fitment on the 2013-2015 Ram C/V Tradesman: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 6.5" | +23 to +45 |
| 16-20" | 7" | +29 to +39 |
Wider still: 16x8 +21 to +32; 17x8 +21 to +32; 18x8 +21 to +32; 19x8 +21 to +32; 20x8 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
The 2013-2015 Ram C/V Tradesman (RT) uses a 5X127 bolt pattern and a 71.5 mm center bore.
Factory sizes: 16x6.5 +40; 17x6.5 +40; 17x7 +40; 18x6.5 +40; 18x7 +40; 19x7 +40; 19x7.5 +40.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.