Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ram Dakota built from 2011 to 2011 (Big Horn, Lone Star, Laramie).
Every 2011 Ram Dakota uses a 5X139.7 bolt pattern with a 77.8 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 77.8 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ram Dakota (ND) and the model years each was sold. All of them share the 5X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| Big Horn | 2011 |
| Lone Star | 2011 |
| Laramie | 2011 |
Wheel sizes Ram fitted to the 2011 Ram Dakota from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7 +25 |
| 16x8 +25 |
| 17x8 +25 |
| 18x8 +25 |
| 19x8.5 +20 |
Widths and offsets with Verified Fitment on the 2011 Ram Dakota: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 7" | -5 to +35 |
| 16-20" | 7.5" | +2 to +37 |
| 16-20" | 8" | +8 to +30 |
| 16-20" | 8.5" | +14 to +24 |
Wider still: 16x9.5 +6 to +17; 17x9.5 +6 to +17; 18x9.5 +6 to +17; 19x9.5 +6 to +17; 20x9.5 +6 to +17 fit with modifications (2 in front leveling kit for 33 in tires, trim front bumper valance and inner fender liners, hub-centric rings for aftermarket wheels).
The 2011 Ram Dakota (ND) uses a 5X139.7 bolt pattern and a 77.8 mm center bore.
Factory sizes: 16x7 +25; 16x8 +25; 17x8 +25; 18x8 +25; 19x8.5 +20.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.