Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Scion xB built from 2007 to 2007.
Every 2007 Scion xB uses a 4X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
Wheel sizes Scion fitted to the 2007 Scion xB from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +39 |
Widths and offsets with Verified Fitment on the 2007 Scion xB: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-16" | 6" | +22 to +45 |
| 15-16" | 6.5" | +28 to +38 |
Wider still: 15x7.5 +20 to +31; 16x7.5 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).
The 2007 Scion xB (NCP31) uses a 4X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 15x6 +39.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 16" in diameter; see the size table for the offset range at each width.