Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Scion xD built from 2008 to 2014 (Base, RS 1.0).
Every 2008-2014 Scion xD uses a 5X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Scion xD (XP110) and the model years each was sold. All of them share the 5X100 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2008-2014 |
| RS 1.0 | 2008 |
Wheel sizes Scion fitted to the 2008-2014 Scion xD from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6 +39 |
| 16x6 +45 |
| 16x6.5 +45 |
| 17x6.5 +45 |
| 17x7 +45 |
| 18x7 +45 |
| 18x7.5 +41 |
| 18x8 +38 |
Widths and offsets with Verified Fitment on the 2008-2014 Scion xD: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-17" | 6" | +22 to +45 |
| 16-17" | 6.5" | +28 to +38 |
Wider still: 16x7.5 +20 to +31; 17x7.5 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).
The 2008-2014 Scion xD (XP110) uses a 5X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 16x6 +39; 16x6 +45; 16x6.5 +45; 17x6.5 +45; 17x7 +45; 18x7 +45; 18x7.5 +41; 18x8 +38.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 17" in diameter; see the size table for the offset range at each width.