Subaru Ascent 1st Gen (WM) 2019-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Subaru Ascent built from 2019 to 2026 (Base, Premium, Onyx Edition, Limited, Touring).

Fitment specs

Bolt pattern5X114.3
Center bore56.1 mm
Lug threadM12x1.25
Model years2019-2026
Generation1st Gen (WM)

Every 2019-2026 Subaru Ascent uses a 5X114.3 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Subaru Ascent (1st Gen (WM)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2019-202218x7.5 +55
Premium2019-202618x7.5 +55
Onyx Edition2022-202620x7.5 +55
Limited2019-202620x7.5 +55
Touring2019-202620x7.5 +55

Factory wheel sizes

Wheel sizes Subaru fitted to the 2019-2026 Subaru Ascent from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7.5 +55
19x7.5 +55
20x7.5 +55
20x8 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2019-2026 Subaru Ascent: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Premium

DiameterWidthOffset range
18-21"7.5"+38 to +60
18-21"8"+44 to +54

Wider still: 18x9 +36 to +47; 19x9 +36 to +47; 20x9 +36 to +47; 21x9 +36 to +47 fit with modifications (trim front mud flaps / inner liner at full lock, roll fender lips, 1-2 in. lift (spacers) for larger all-terrain tires).

Onyx Edition, Limited, Touring

DiameterWidthOffset range
20-21"7.5"+38 to +60
20-21"8"+44 to +54

Wider still: 20x9 +36 to +47; 21x9 +36 to +47 fit with modifications (trim front mud flaps / inner liner at full lock, roll fender lips, 1-2 in. lift (spacers) for larger all-terrain tires).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2019-2026 Subaru Ascent. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, Premium

Modifications Required (trim front mud flaps / inner liner at full lock, roll fender lips, 1-2 in. lift (spacers) for larger all-terrain tires)

Onyx Edition, Limited, Touring

Modifications Required (trim front mud flaps / inner liner at full lock, roll fender lips, 1-2 in. lift (spacers) for larger all-terrain tires)

FAQ

What is the bolt pattern of the 2019-2026 Subaru Ascent?

The 2019-2026 Subaru Ascent (1st Gen (WM)) uses a 5X114.3 bolt pattern and a 56.1 mm center bore.

What size wheels came on the 2019-2026 Subaru Ascent from the factory?

Factory sizes: 18x7.5 +55; 19x7.5 +55; 20x7.5 +55; 20x8 +50.

What lug thread size does the 2019-2026 Subaru Ascent use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2019-2026 Subaru Ascent without modifications?

Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.