Subaru BRZ (ZC6) 2013-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Subaru BRZ built from 2013 to 2020 (Premium, Limited, tS).

Fitment specs

Bolt pattern5X100
Center bore56.1 mm
Lug threadM12x1.25
Model years2013-2020
GenerationZC6

Every 2013-2020 Subaru BRZ uses a 5X100 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Subaru BRZ (ZC6) and the model years each was sold. All of them share the 5X100 bolt pattern.

SubmodelYearsFactory wheel sizes
Premium2013-202017x7 +48
17x7.5 +48
Limited2013-202018x7.5 +48
tS201818x7.5 +48

Factory wheel sizes

Wheel sizes Subaru fitted to the 2013-2020 Subaru BRZ from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +48
17x7.5 +48
18x7.5 +48
18x8 +45
19x7.5 +45 front / 19x8 +45 rear
19x8 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2013-2020 Subaru BRZ: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Premium

DiameterWidthFront offsetRear offset
18-20"7"+21 to +58+9 to +58
18-20"7.5"+28 to +57+15 to +57
18-20"8"+34 to +50+21 to +51
18-20"8.5"+40 to +44+28 to +44
18-20"9"—+34 to +38

Limited, tS

DiameterWidthFront offsetRear offset
18-20"7.5"+28 to +57+15 to +57
18-20"8"+34 to +50+21 to +51
18-20"8.5"+40 to +44+28 to +44
18-20"9"—+34 to +38

FAQ

What is the bolt pattern of the 2013-2020 Subaru BRZ?

The 2013-2020 Subaru BRZ (ZC6) uses a 5X100 bolt pattern and a 56.1 mm center bore.

What size wheels came on the 2013-2020 Subaru BRZ from the factory?

Factory sizes: 17x7 +48; 17x7.5 +48; 18x7.5 +48; 18x8 +45; 19x7.5 +45 front / 19x8 +45 rear; 19x8 +45.

What lug thread size does the 2013-2020 Subaru BRZ use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2013-2020 Subaru BRZ without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.