Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Subaru Loyale built from 1990 to 1994.
Every 1990-1994 Subaru Loyale uses a 4X140 bolt pattern with a 94.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 94.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Subaru Loyale (3rd Gen) and the model years each was sold. All of them share the 4X140 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1990-1994 |
Wheel sizes Subaru fitted to the 1990-1994 Subaru Loyale from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 13x5 +55 |
Widths and offsets with Verified Fitment on the 1990-1994 Subaru Loyale: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 13-14" | 5" | +38 to +61 |
| 13-14" | 5.5" | +44 to +54 |
Wider still: 13x6.5 +36 to +47; 14x6.5 +36 to +47 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).
The 1990-1994 Subaru Loyale (3rd Gen) uses a 4X140 bolt pattern and a 94.5 mm center bore.
Factory sizes: 13x5 +55.
Bolt-on sizes run from 13" to 14" in diameter; see the size table for the offset range at each width.