Subaru SVX (CX) 1992-1997 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Subaru SVX built from 1992 to 1997 (L, LS, LSi).

Fitment specs

Bolt pattern5X114.3
Center bore56.1 mm
Lug threadM12x1.25
Model years1992-1997
GenerationCX

Every 1992-1997 Subaru SVX uses a 5X114.3 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Subaru SVX (CX) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
L1994-199716x7.5 +55
LS1992-199416x7.5 +55
LSi1992-199716x7 +48
16x7.5 +55

Factory wheel sizes

Wheel sizes Subaru fitted to the 1992-1997 Subaru SVX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +48
16x7.5 +55
17x7.5 +55
17x8 +48
17x8 +55
18x8.5 +48

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1992-1997 Subaru SVX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

L, LS

DiameterWidthOffset range
16-19"7.5"+38 to +60
16-19"8"+44 to +54

Wider still: 16x9 +36 to +47; 17x9 +36 to +47; 18x9 +36 to +47; 19x9 +36 to +47 fit with modifications (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset).

LSi

DiameterWidthOffset range
16-19"7"+31 to +58
16-19"7.5"+38 to +60
16-19"8"+44 to +54

Wider still: 16x9 +36 to +47; 17x9 +36 to +47; 18x9 +36 to +47; 19x9 +36 to +47 fit with modifications (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1992-1997 Subaru SVX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

L, LS

Modifications Required (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset)

LSi

Modifications Required (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset)

FAQ

What is the bolt pattern of the 1992-1997 Subaru SVX?

The 1992-1997 Subaru SVX (CX) uses a 5X114.3 bolt pattern and a 56.1 mm center bore.

What size wheels came on the 1992-1997 Subaru SVX from the factory?

Factory sizes: 16x7 +48; 16x7.5 +55; 17x7.5 +55; 17x8 +48; 17x8 +55; 18x8.5 +48.

What lug thread size does the 1992-1997 Subaru SVX use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 1992-1997 Subaru SVX without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.