Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Subaru WRX built from 2002 to 2003.
Every 2002-2003 Subaru WRX uses a 5X100 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Subaru WRX (GD/GG) and the model years each was sold. All of them share the 5X100 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2002-2003 |
Wheel sizes Subaru fitted to the 2002-2003 Subaru WRX from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +55 |
| 17x6.5 +55 |
| 17x7.5 +53 |
Widths and offsets with Verified Fitment on the 2002-2003 Subaru WRX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6.5" | +38 to +60 |
| 16-18" | 7" | +44 to +54 |
Wider still: 16x8 +36 to +47; 17x8 +36 to +47; 18x8 +36 to +47 fit with modifications (roll rear fender lips, front camber bolts (strut-to-knuckle) for -1° or more, rear camber/toe arms if running low offset).
The 2002-2003 Subaru WRX (GD/GG) uses a 5X100 bolt pattern and a 56.1 mm center bore.
Factory sizes: 16x6.5 +55; 17x6.5 +55; 17x7.5 +53.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.