Toyota bZ (EA10) 2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota bZ built from 2026 to 2026 (XLE, Limited).

Fitment specs

Bolt pattern5X114.3
Center bore60.1 mm
Lug threadM12x1.5
Model years2026
GenerationEA10

Every 2026 Toyota bZ uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota bZ (EA10) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
XLE202618x7.5 +40
Limited202620x7.5 +40

Factory wheel sizes

Wheel sizes Toyota fitted to the 2026 Toyota bZ from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7.5 +40
20x7.5 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2026 Toyota bZ: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

XLE

DiameterWidthOffset range
18-22"7.5"+23 to +45
18-22"8"+29 to +39

Wider still: 18x9 +21 to +32; 19x9 +21 to +32; 20x9 +21 to +32; 21x9 +21 to +32; 22x9 +21 to +32 fit with modifications (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

Limited

DiameterWidthOffset range
20-22"7.5"+23 to +45
20-22"8"+29 to +39

Wider still: 20x9 +21 to +32; 21x9 +21 to +32; 22x9 +21 to +32 fit with modifications (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2026 Toyota bZ. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

XLE

Modifications Required (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels)

Limited

Modifications Required (trim front bumper cover / fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2026 Toyota bZ?

The 2026 Toyota bZ (EA10) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.

What size wheels came on the 2026 Toyota bZ from the factory?

Factory sizes: 18x7.5 +40; 20x7.5 +40.

What lug thread size does the 2026 Toyota bZ use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2026 Toyota bZ without modifications?

Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.