Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota Celica built from 2000 to 2005 (GT, GT-S).
Every 2000-2005 Toyota Celica uses a 5X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Toyota Celica (T230) and the model years each was sold. All of them share the 5X100 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| GT | 2000-2005 | 15x6.5 +39 |
| GT-S | 2000-2005 | 15x6.5 +39 |
Wheel sizes Toyota fitted to the 2000-2005 Toyota Celica from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 13x6 +40 |
| 14x6 +40 |
| 15x6.5 +39 |
| 16x6.5 +39 |
Widths and offsets with Verified Fitment on the 2000-2005 Toyota Celica: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 6.5" | +15 to +49 |
| 15-18" | 7" | +21 to +49 |
| 15-18" | 7.5" | +28 to +42 |
| 15-18" | 8" | +34 to +36 |
The 2000-2005 Toyota Celica (T230) uses a 5X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 13x6 +40; 14x6 +40; 15x6.5 +39; 16x6.5 +39.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.