Toyota Crown 2023-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota Crown built from 2023 to 2026 (XLE, Limited, Nightshade, Platinum).

Fitment specs

Bolt pattern5X114.3
Center bore60.1 mm
Lug threadM14x1.5
Model years2023-2026
Generation

Every 2023-2026 Toyota Crown uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota Crown and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
XLE2023-202619x7 +40
Limited2023-202619x7 +40
Nightshade2024-202621x7.5 +35
Platinum2023-202621x7.5 +35

Factory wheel sizes

Wheel sizes Toyota fitted to the 2023-2026 Toyota Crown from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
19x7 +40
21x7.5 +35

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2023-2026 Toyota Crown: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

XLE, Limited

DiameterWidthOffset range
19-22"7"+23 to +45
19-22"7.5"+29 to +39

Wider still: 19x8.5 +21 to +32; 20x8.5 +21 to +32; 21x8.5 +21 to +32; 22x8.5 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).

Nightshade, Platinum

DiameterWidthOffset range
21-22"7.5"+29 to +39

Wider still: 21x8.5 +21 to +32; 22x8.5 +21 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 Toyota Crown. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2023-2026 Toyota Crown?

The 2023-2026 Toyota Crown uses a 5X114.3 bolt pattern and a 60.1 mm center bore.

What size wheels came on the 2023-2026 Toyota Crown from the factory?

Factory sizes: 19x7 +40; 21x7.5 +35.

What lug thread size does the 2023-2026 Toyota Crown use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2023-2026 Toyota Crown without modifications?

Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.