Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Toyota GR Supra built from 2020 to 2026 (2.0, 3.0, 3.0 Premium).
Every 2020-2026 Toyota GR Supra uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Toyota GR Supra (A90) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| 2.0 | 2021-2022 |
| 3.0 | 2020-2026 |
| 3.0 Premium | 2020-2026 |
Wheel sizes Toyota fitted to the 2020-2026 Toyota GR Supra from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +24 |
| 18x9 +32 |
| 18x9 +32 front / 18x10 +40 rear |
| 19x9 +32 front / 19x10 +40 rear |
Widths and offsets with Verified Fitment on the 2020-2026 Toyota GR Supra: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 9" | +15 to +38 | — |
| 18-20" | 9.5" | +21 to +31 | — |
| 18-20" | 10" | — | +23 to +46 |
| 18-20" | 10.5" | — | +29 to +39 |
Wider still: 18x11.5 front — / rear +21 to +32; 19x11.5 front — / rear +21 to +32; 20x11.5 front — / rear +21 to +32 fit with modifications (roll or pull rear fender lips, adjustable rear camber arms, front camber bolts or adjustable camber plates).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2026 Toyota GR Supra. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll or pull rear fender lips, adjustable rear camber arms, front camber bolts or adjustable camber plates)
The 2020-2026 Toyota GR Supra (A90) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7.5 +24; 18x9 +32; 18x9 +32 front / 18x10 +40 rear; 19x9 +32 front / 19x10 +40 rear.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.