Toyota GR86 (ZN8) 2022-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Toyota GR86 built from 2022 to 2026 (Base, Premium).

Fitment specs

Bolt pattern5X100
Center bore56.1 mm
Lug threadM12x1.25
Model years2022-2026
GenerationZN8

Every 2022-2026 Toyota GR86 uses a 5X100 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Toyota GR86 (ZN8) and the model years each was sold. All of them share the 5X100 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2022-202617x7 +48
17x7.5 +48
18x7.5 +48
Premium2022-2026See factory sizes below

Factory wheel sizes

Wheel sizes Toyota fitted to the 2022-2026 Toyota GR86 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +48
17x7.5 +48
18x7.5 +48

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2022-2026 Toyota GR86: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-19"7.5"+28 to +53
17-19"8"+34 to +47
17-19"8.5"+40 to +41

Wider still: 17x9 +29 to +40; 18x9 +29 to +40; 19x9 +29 to +40 fit with modifications (roll front and rear fender lips, front camber bolts for extra negative camber, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2022-2026 Toyota GR86?

The 2022-2026 Toyota GR86 (ZN8) uses a 5X100 bolt pattern and a 56.1 mm center bore.

What size wheels came on the 2022-2026 Toyota GR86 from the factory?

Factory sizes: 17x7 +48; 17x7.5 +48; 18x7.5 +48.

What lug thread size does the 2022-2026 Toyota GR86 use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2022-2026 Toyota GR86 without modifications?

Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.